Pumps and Water

Can You Use Rainwater in a Swamp Cooler?

Rainwater is the best water for a swamp cooler, but a roof rarely catches enough. Rain vs cooler use by month for Tucson, Phoenix, Albuquerque and Denver.

Short answer

Yes. Rainwater is the best water a swamp cooler can get, because it carries almost no minerals to leave behind as scale. The problem is quantity. A 4,500 CFM cooler uses about 137 gallons a day, and 1 inch of rain on 1 square foot of roof gives 0.623 gallons. In May and June, the hottest dry months before the monsoon, a 2,000 square foot roof in Tucson or Phoenix catches only 4 to 13 percent of what the cooler uses. Running on rain alone would take a cistern of about 7,000 to 8,000 gallons filled by winter rain. Colorado's rain barrel law allows only 110 gallons, for outdoor uses.

Key takeaways

  • Rainwater is close to ideal for the cooler itself: no hardness means little scale and little bleed-off. Roof dust and debris still have to be screened out.
  • Supply is the catch. 1 inch of rain on 1 square foot of roof is 0.623 gallons. A 4,500 CFM cooler uses about 137 gallons a day, or about 21,000 gallons from May through September.
  • May and June are the driest hot months. On a 2,000 sq ft roof, NASA POWER averages give Tucson 710 gallons and Phoenix 411 gallons for both months together, against about 8,360 gallons of cooler use.
  • To run May and June on rain, you need a cistern of roughly 7,000 to 8,000 gallons in the desert cities, filled by December to April rain. That takes 2,600 to 4,400 sq ft of roof.
  • Colorado allows two barrels, 110 gallons total, for outdoor uses such as lawns, plants and gardens. Tucson Water's rebate pays for landscape and water-feature systems, not cooler feeds. Rain works best as a top-up or blend, or for a portable cooler.
On this page
  1. What rainwater harvesting means for a cooler
  2. Why rain is good for the cooler
  3. The supply problem, in gallons
  4. Rain against cooler use, by city and month
  5. What the rules allow
  6. Where rainwater does make sense
  7. What this page does not cover
  8. Frequently asked questions

Yes, you can use rainwater in a swamp cooler, and for the cooler itself it is the best water there is. Rain carries almost no dissolved minerals, so it leaves almost no scale on the pads. The catch is quantity. A whole-house cooler drinks far more water than a house roof catches in the months you need it most. In Tucson and Phoenix, May and June are the hottest dry months. On a 2,000 square foot roof, they bring 4 to 13 percent of the water a 4,500 CFM cooler uses. The monsoon comes after them, not before.

So the real question is not "can you" but "how much roof and tank does it take". This page works that out for Tucson, Phoenix, Albuquerque and Denver, and covers the rules that limit what you can store.

What rainwater harvesting means for a cooler

Rainwater harvesting is catching rain as it runs off a roof or other hard surface. You store it and then put it to use. That is how Colorado State University Extension defines it. Water from a downspout that just runs onto a flower bed does not count. A cistern is the storage tank: anything from a 55 gallon barrel to a buried tank of several thousand gallons.

A rooftop cooler takes its water in a different way. A float valve tops up the pan from the house line, using house water pressure. The pads evaporate pure water and leave the minerals behind. Bleed-off is the small stream of pan water the cooler drains on purpose to carry those minerals out. The less mineral comes in, the less bleed-off the cooler needs.

Why rain is good for the cooler

Brad Lancaster, the Tucson author of Rainwater Harvesting for Drylands and Beyond, puts it plainly: "You never get any salt or other mineral build up on your evaporative cooler pads when rainwater is your water source." His one exception is a home right by a large body of salt water, where wind can carry salt into the rain.

That fits the arithmetic in our scale removal guide. A cooler that evaporates 120 gallons a day of water at 250 mg/L hardness leaves about 114 grams (0.25 lb) of minerals behind each day. Rain brings that close to zero. Even a blend helps in direct proportion. If half the water the cooler takes in is rain, half the minerals arrive, so about 57 grams a day in that example.

Rain is not perfectly clean once it hits a roof, though. CSU Extension notes that bird droppings, dust and other matter build up on roofs between storms. Its sheet adds that heavy metals such as cadmium, copper, lead and zinc have been detected in roof runoff. For a cooler, the practical problem is grit that clogs the pump screen, the distributor holes and the float. A first-flush diverter sends the first few gallons of each storm away from the tank. CSU describes one type with a floating ball that closes after about 5 gallons. Add a screen on the inlet and a filter ahead of any pump that feeds the cooler.

The supply problem, in gallons

Two numbers decide everything. The first is how much water a roof catches:

Gallons caught = roof area (sq ft) x rain (inches) x 0.623

One inch of rain on one square foot is 1/12 of a cubic foot. A cubic foot holds 7.48 gallons, so that is 0.623 gallons. The roof area is the flat footprint under the roof, not the sloped surface.

The second is how much the cooler uses. Our water usage guide gives about 110 gallons of evaporation a day for a 4,500 CFM cooler at a 20 F average drop over 10 hours. With soft water like rain, bleed-off adds about 25 percent, for 137 gallons a day. That is about 4,250 gallons a month and about 21,000 gallons from May through September. You can run your own cooler's figures in the water usage calculator.

Notice what rain can and cannot change here. It cuts the bleed-off. It cannot cut the 110 gallons of evaporation, because that water is what does the cooling.

Worked example: a Tucson house running its cooler on rain

Take a Tucson house with a 2,000 sq ft roof and a 4,500 CFM cooler. NASA POWER averages for 2001 to 2025 give Tucson 0.15 in of rain in May and 0.42 in in June.

The roof catches 2,000 x 0.57 x 0.623 = 710 gallons over those two months. The cooler uses 137 x 61 = 8,357 gallons. Rain covers about 8 percent.

The other 7,647 gallons would have to be in a tank on May 1. Where would it come from? December through April brings 3.59 in on average. At 0.623 gallons per inch per square foot, filling 7,647 gallons from that rain takes 7,647 / (3.59 x 0.623) = about 3,420 sq ft of roof. That is more roof than the house has, and it assumes every drop is caught and none is used for anything else.

Then July arrives. Tucson averages 3.43 in, and the same roof catches 4,274 gallons, about what the cooler uses that month. The rain finally matches the need, just as the monsoon's humidity makes the cooler work less well.

Rain against cooler use, by city and month

The table runs the same 2,000 sq ft roof through each city's monthly rain. The figures are NASA POWER averages (PRECTOTCORR, 2001 to 2025). Each cell gives the rain in inches, the gallons the roof catches, and that catch as a share of the cooler's 137 gallons a day for the month.

Rain caught on a 2,000 sq ft roof vs a 4,500 CFM cooler's use (about 4,110 to 4,250 gallons a month)
CityMayJuneJulyAugustSeptember
Tucson0.15 in, 187 gal (4%)0.42 in, 523 gal (13%)3.43 in, 4,274 gal (101%)2.72 in, 3,389 gal (80%)1.53 in, 1,906 gal (46%)
Phoenix0.20 in, 249 gal (6%)0.13 in, 162 gal (4%)1.36 in, 1,695 gal (40%)1.40 in, 1,744 gal (41%)0.91 in, 1,134 gal (28%)
Albuquerque0.50 in, 623 gal (15%)0.65 in, 810 gal (20%)1.95 in, 2,430 gal (57%)1.71 in, 2,131 gal (50%)1.31 in, 1,632 gal (40%)
Denver2.50 in, 3,115 gal (73%)1.76 in, 2,193 gal (53%)2.38 in, 2,965 gal (70%)2.07 in, 2,579 gal (61%)1.38 in, 1,719 gal (42%)

No city covers the season. Over May through September the roof catches about 10,300 gallons in Tucson, 5,000 in Phoenix, 7,600 in Albuquerque and 12,600 in Denver, against about 21,000 used. In Tucson, Phoenix and Albuquerque, a whole year of rain on that roof (12,600 to 16,200 gallons) is less than one cooler season.

The shape matters as much as the total. In the three desert cities, May and June are the gap. Lancaster notes that Tucson's summer rains usually come at the end of June or early July. Those weeks before the monsoon are the cooler's best weeks, because the air is at its driest. When the storms come, humidity rises and the cooler loses some of its drop. Our monsoon season guide covers that side.

Here is what it takes to bridge May and June on stored rain, with the same roof and cooler:

Cistern needed to carry May and June, filled by December to April rain
CityDec to Apr rainMay and June catchCistern needed May 1Roof needed to fill it
Tucson3.59 in710 gal7,647 galAbout 3,420 sq ft
Phoenix4.90 in411 gal7,946 galAbout 2,600 sq ft
Albuquerque2.54 in1,433 gal6,924 galAbout 4,380 sq ft
Denver5.62 in5,308 gal3,049 galAbout 870 sq ft (but see the Colorado limit below)

The cistern column is the 8,357 gallons the cooler uses in May and June, minus that period's catch. The roof column divides it by the winter rain times 0.623. Denver gets the most spring rain of the four, which is why its numbers look easy. The law there is the limit, not the weather.

What the rules allow

Colorado. House Bill 16-1005 covers single-family homes and buildings of four or fewer units. Each may use at most two rain barrels, with a combined 110 gallons. The water must be used on the same property. CSU Extension's summary says it may be used "for only outdoor purposes, including to water outdoor lawns, plants and/or gardens," and it "cannot be used for drinking or other indoor water uses." A cooler is not a listed use. In any case, 110 gallons is less than one day of a 4,500 CFM cooler's use. There is one narrow exception. Under Senate Bill 09-080, a rural home with an exempt well can get a rooftop collection permit from the Colorado Division of Water Resources. That water may be used only for the uses on the well permit. If you think you qualify, ask the Division.

Tucson. Tucson Water pays a rainwater harvesting rebate on storage. A roof system that holds at least 1 inch of rain from the roof feeding it earns $1.00 per gallon. One that holds less earns $0.50 per gallon. Storage is capped at $1,900 (plus up to $99 through its tree rebate). You must first take a workshop with Watershed Management Group, and your site plan has to show a beneficial use for the water. The uses it lists are trees, shrubs, gardens, potted plants, lawn, pool and water features. Evaporative coolers are not on the list. The rebate is a payment rule, not a ban, but a system built to feed a cooler is not what it pays for.

The rebate also shows the scale gap. On the 2,000 sq ft roof, 1 inch of storage is 1,246 gallons, worth $1,246 under the rebate. That tank would run the cooler for about 9 days. Other states and cities have their own rules, so check yours before you plumb anything.

Where rainwater does make sense

  • A portable cooler. A 1,000 CFM portable uses about 24 gallons on a hot 10 hour day. A 110 gallon set of barrels can carry one for about 4 to 5 days. Fill the tank by bucket or hose from the barrel. See how much water a swamp cooler holds for tank sizes.
  • A blend, not a replacement. Keep the house line on the float. When the cistern has water, feed it in too. Every gallon of rain is a gallon with no minerals, so scale drops in proportion, and you can trim the bleed. Our bleed-off guide covers how to set it.
  • A filtered, pumped feed. A ground-level tank cannot feed a roof float by gravity. It needs a pump that can lift the water and hold enough pressure to work the float, plus a filter. Keep that line separate from the drinking water system. The supply line guide covers float pressure and backflow.

Any stored water can breed mosquitoes. Colorado requires a sealable lid on rain barrels, and CSU Extension advises emptying them completely at least once a month. Our guide on whether swamp coolers breed mosquitoes covers the cooler pan side.

What this page does not cover

The rain figures are NASA POWER averages for a modeled grid cell, not a rain gauge at your house. They run a little higher than some local figures: POWER gives Tucson 13.0 in a year, where Lancaster gives 11. Real years swing widely. In 9 of the 25 years, POWER shows Tucson with under 0.25 in for May and June together, and in Phoenix it was 16 years. The catch formula assumes every drop that hits the roof reaches the tank. Real gutters, first-flush diverters and overflow lose some, so real roofs need to be bigger than the tables show. The cooler figure is a planning number for a 4,500 CFM unit on a hot day. Mornings, cool weeks and smaller coolers use less. The arithmetic scales directly with your own number. This page does not cover drinking-water safety, tank construction or structural loads. It does not rule on state law outside Colorado, or on Tucson's rules beyond the rebate.

Frequently asked questions

Is rainwater better than tap water for a swamp cooler?

For scale, yes. Tap water in the desert Southwest is often hard, and every gallon evaporated leaves its minerals on the pads and pan. Rain has almost none, so pads last longer and the cooler needs little bleed-off. Rain picks up dust and debris from the roof, so screen it before it reaches the pump.

How big a rain barrel do I need for a swamp cooler?

A barrel is too small for a rooftop cooler. A 4,500 CFM cooler uses about 137 gallons a day, more than two 55 gallon barrels hold. A portable cooler of about 1,000 CFM uses about 24 gallons on a hot 10 hour day, so a barrel can carry one for a few days.

Can I hook a rain barrel to my rooftop cooler's float valve?

Not by gravity from the ground. The float valve is fed by house water pressure, and the cooler sits on the roof. A cistern feed needs a pump to lift and pressurize the water, plus a filter to keep roof grit out of the float.

Is it legal to use rainwater in a swamp cooler in Colorado?

Colorado's HB16-1005 lets most homes keep two barrels, 110 gallons total, for outdoor purposes such as lawns, plants and gardens, and bars indoor water uses. A cooler is not a listed use. Rural homes with an exempt well permit can collect more under SB09-080, but only for the uses that well permit allows. Ask the Colorado Division of Water Resources about your case.

Does rainwater stop all scale in a swamp cooler?

It stops most of it, because scale is the minerals left behind by evaporation, and rain has very few. Brad Lancaster reports no mineral buildup on pads fed with rain in Tucson, except near large bodies of salt water. Dust that washes off the roof can still settle in the pan, so keep draining and cleaning it.

Sources and further reading

  1. Rainwater is the best water for your evaporative cooler and your living, evapotranspiring coolers (Brad Lancaster, May 2022), Rainwater Harvesting for Drylands and Beyond
  2. Rainwater Collection in Colorado (Cabot, Olson, Waskom and Rein; published May 2025, reviewed August 2025), Colorado State University Extension
  3. Rainwater Harvesting Rebate, Tucson Water, City of Tucson
  4. POWER Monthly and Annual API, PRECTOTCORR (precipitation corrected), 2001 to 2025, MERRA-2 source, NASA Langley Research Center, POWER Project